2024 Hustler Equipment Applic8r Mounted Boom Sprayers LX680
- Year 2024
- Make Hustler Equipment
- Model Applic8r Mounted Boom Sprayers
2024 Hustler Equipment Applic8r Mounted Boom Sprayers LX680
Meet our all-new linkage boom sprayer range Applic8r- With the industry’s best warranty, unique best in class agitation and mixing, toughest design on the market, user-friendly low profile tanks, installation and training – with a Hustler boom sprayer, you’re covered
Features may include:
- Ultra-Low Tank Profile
- We understood the dangers of climbing onto sprayers with chemical or to see inside the tank. So with careful tank/chassis integration, we’ve kept it compact and ultra-low, in fact, the lowest in their class, so that you can easily operate the sprayer from on the ground.
- CoupleUp™ Filling System
- Filling’s a snap, fill as you normally would through the lid or with our unique CoupleUp™ 2” tank filling system, if you have a mixing station or trash pump you can fill directly using that pump, or you can also utilise the Applic8r’s own pump to fill out of a trough.
- MixMax™ Agitation
- MixMax™ Agitation System saves you from stripey paddocks. Hustler used the latest CAD flow simulation technology to create the perfect mix of fluid throughout the tank without dead spots. Powerful enough for the thickest of fertilisers and let you control how much you need, from zero to full agitation.
- Ultra-Low Tank Profile
- We understood the dangers of climbing onto sprayers with chemical or to see inside the tank. So with careful tank/chassis integration, we’ve kept it compact and ultra-low, in fact, the lowest in their class, so that you can easily operate the sprayer from on the ground.
- ViziGauge™
- Our unique ViziGauge™ is visible from 120 degrees, so you can easily see your tank level from the tractor seat and the ground how much fluid you have left. A floating ball tube gauge makes it easy to read the calibrated ViziGauge™ which now features both Gallons and Litres and provides more tank-filling accuracy with our unique mould-in permanent graphics.
- Unique Chassis Design
- Compact and built to last, it has the biggest section in its class! The unique straight-through chassis design and careful attention chassis/tank/pump integration has allowed Hustler to produce the toughest and most compact sprayer available today. The Applic8r’s chassis has been CAD tested for stress and real-life tested for fatigue on our destroyer. It lasted in excess of 4 times the required benchmark.
- ISO Linkage plates
- The Applic8r’s 3 point mounts are built to ISO standard unlike most other sprayers. This means you no longer need to park your sprayer on a stack of pallets so the 3 point linkage can reach it and it fits both fixed and floating 3 point linkage arms making it quicker and safer to hook up.
- Built-in SkidPlate™
- A tough built-in SkidPlate™ protects the vital parts including the pump, tank, filters, drain, from damage should you misjudge a hump or hollow.
- QuickFlush™ Tank Drain
- A high-flow tank dump operated from the top of the tank saves the operator from climbing underneath to empty the tank and reduces clean-up time, as well as from getting covered in chemicals during clean-up.
- Deep sump
- A generous sump size is all part of the design so that you can spray on steep terrain without sucking air and leaving missed patches and empty’s the entire tank even when operating on the steepest of terrain.
Hydraulics
Hydraulic Pump
110L/min (29 gal/min) rear mounted Comet pump
Dimensions
Dimensions
Lid: Hingend 455mm (18 in) lid with basket strainer | Booms: Standard with 6 metre (19.6 ft) DuraBoom.
Capacities
Features
Tank Size: 680L (180 gal) | Hand Washing Tank: 18L (4.7 gal) capacity
Features
Features
Storage: Built in toolbox | Controls: Three section Arag controls with SlickFit, and PressureLock function | Agitation: Recirculation. | Gauge: ViziGauge view | UtilityBar, CoupleUp tank filling system